Cyclo Drive Reducer

Cycloidal pinwheel reducer is usually a up-dated of latest type transmissing machine designed with K-H-V less tooth engagement and the cycloidal pin steering wheel clenching mechanism, which are widely used in drive and minimizing of textile and dying, foodstuff, mining and metallurgy, Essential oil and chemical job machinery etc, cranes, conveyors and Industry. various fields.

1. Gear is made from high power low carbon alloy metal by carburizing and quenching. The hardness of tooth surface can reach HRC58-62. CNC grinding technology is adopted for all gears, with great precision and good contact performance
2. high transmission effectiveness: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable procedure and low noise;
4, compact structure, light weight, long service existence and high bearing ability;
5. convenient to disassemble, assemble and check.

Operation specifications and precautions
1.High modularization design: many equip with various electric motor or other power source conveniently.Same machine type may equip with different power motor. It really is easy to know the combination and
junction between every machine type.
2.Transmission ratio: okay division, wide scope. The combined machine type may form large transmission ratio, i.e. outcome very low rotary speed.
3.Form of set up: the position to be installed isn’t limited.
4.High strength, compact: the box body is constructed of substantial strength cast iron. Gear and equipment shaft adapts the gas carbonization, quenching and excellent grinding process, which means bearing potential of unitvolume is large.
5.Long life: Beneath the condition of appropriate type chosen (including choosing ideal operation parameters)normal procedure and maintenance, the life of main parts of speed reducer (except dressed in parts) shouldn’t be significantly less than 20000 hours. The putting on parts include lubricating essential oil, oil seal and bearing.
6.Low noise: because main elements of speed reducer are processed, assembled and tested critically,which means noise of speed reducer is definitely low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer

1. High rate ratio and efficiency
Single stage transmission may reach to 1 1:87 of speed-downward ratio and the efficiency is definitely a lot more than 90%. If make use of multi-speed get the speed-down ratio is normally bigger.
2. Compact
Being adapted epicyclic tranny theory, the input and outcome shaft are in same axis middle, it is compact.
3. Smooth and secure run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the device part is stable, the vibration and noise is bound anyway content.
1. Large deceleration ratio
A high deceleration ratio of 1/30-1/320 can be obtained.The structure is easy, but it can know high reduction ratio gadget.
2. Small gear clearance
The Get, which meshes with ordinary gears and has minimal backlash, is essential to the controller business.
3. High precision
Multiple teeth are involved at the same time, and there are several gears engaged with 180 degree symmetry. Subsequently, the effect of tooth pitch error and cumulative tooth pitch error on the rotation accuracy is relatively average, making the position precision and rotation accuracy reach a very high level.
4. Less parts, easy installation
The three basic components achieve a high deceleration ratio, plus they are all on a single axis, so the kit is easy to install and simple to shape.
5. Small in proportions and light in weight
Compared with the previous gear device, the quantity is 1/3, the weight is 1/2, but can buy the same torque potential and reduction ratio, attaining small lightweight.
6 High torque capacity
Flexible wheel material USES unique steel with huge fatigue strength.Not the same as ordinary transmission product, the quantity of teeth meshing makes up about close to 30% of the total quantity of teeth. Moreover, it is in call with the surface, to ensure that the pressure borne by each equipment is reduced and great torque potential can be obtained.
7 High efficiency
The sliding of gear meshing parts is quite small, which reduces the power loss due to friction. Therefore, high reduction ratio may be accomplished while maintaining high proficiency, and miniaturization of generating motor can be realized.
8. Low noise
The apparatus meshing cycle swiftness is low, the transmission activity force balance, therefore the procedure is quiet, and the vibration is quite small.
◆Excessive speed ratio and substantial efficiency single-stage transmission can perform a deceleration ratio of 1 1:87, and the efficiency is a lot more than 90%. If multi-stage transmission can be used, the deceleration ratio will end up being larger.
◆Because planetary transmission basic principle is adopted, the suggestions shaft and end result shaft are on the same axis line, in order that the machine version can get the tiniest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is larger, and the mechanism of balancing machine parts produces the vibration and voice limited to a minimum.
◆Reliable use and prolonged service life since the primary parts are made from excessive carbon chromium steel, excessive strength is going to be obtained by quenching (HRC58-62), and rolling friction is utilized in some transmission contacts, therefore the service life is very long.
Cycloid reducer is certainly a cycloid needle teeth meshing planetary transmission principle drive models, is an ideal transmission has various advantages, versatile, and will be both positive and negative operation.

•Big ratio, and excessive efficiency Smooth operation,

• low noise The usage of reliable,

• long life can reach 50000 hours

• Main parts high-carbon the Ming-metal after quenching treatment (HRC58-62),

• operation and contact with rolling friction, basically no wear, durable.

• Compact structure,

• small size Because the usage of a planetary transmitting, the type shaft and the productivity shaft on the same axis, making the model to get the smallest possible size.

• Reasonable design, easy maintenance, and break down easily install,

• the least number of parts together with basic lubrication, cycloid reducer trusted by an individual.
(1)Size above PL/PF120(including)high torque products adopt essential double wall planet pinion enhance the output strength, carrier and precision.

(2).Hoop clamp coupling have five connection methods well suited for different application environments.

(3).Size above PL/PF120(incorporating)precision and high power integral inner gear housing, processed in a single station,which remove the cumulative error and assembling mistake of split type.Get rid of casting process;adopt incredibly hot of forging process, that will reduce the blank material defects.

(4).The meshing equipment adopt shaving process after carburizing and quenching,which easier to make gear surface area smooth and high precision,decrease the temperature rising caused by gear surface area gluing and friction.
This series worm-gear reducer was engineered after RV worm microreducer, which have a complete norm, wide speed for selection, and several mounting positions. Its effectiveness and mounting dime nsions conform the same kinds of foreign.
The blend of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square shape, radiate heat efficiently, compact structure, low noise and beautiful shape.
Great sealing and adaptability.Its mixture with T equipment reducer and MB/MBN variator can meet all sorts of speed requirement.


pto adapter

As one of leading pto adapter manufacturers, suppliers and exporters of mechanical products, We offer pto adapter and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of pto adapter

Recent Posts