Our worm gear reducers offer a choice of a solid or hollow result shaft and show an adjustable mounting placement. Both the SW-1 and the SW-5, nevertheless, can endure shock loading much better than other reduction gearbox designs, making them well suited for demanding applications.
Rugged compression-molded glass-fill polyester housing
Light-weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Solid or Hollow output shaft
Adjustable mounting position
Worm Gear Acceleration Reducers is rated 5.0 out of 5 by 1.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Applied to Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Versions for 56C and 145TC Motors
Our regular 700 Series – the heart of EP Gear’s velocity reducer product line – has been serving industry reliably for over 40 years. Its tested modular design has set the sector standard for efficiency and is the most worm reduction gearbox imitated item in the current worm gear speed reducer marketplace. But why settle for a knock-off when you’re able to have the initial – from EP Gear.
Specifications
11 basic single reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow output shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for longer operating existence.
Its multi-position mounting flexibility permits installation in virtually any position.
Housings are straddle-milled, top and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for optimum durability, and also greater precision during worm and gear alignment.
EP Gear’s 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel result shaft assures capacity for high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal existence.
Both 2D and 3D CAD drawings can be found in our eCatalog.
GEARBOX REDUCERS
Correct angle gearboxes (worm and planetary) are durable and built for 90° turns. Inline reducers (parallel shaft and planetary) are an ideal match for motors with high input speeds, or when gearmotor effectiveness is important. Contact our technical sales staff for help identifying which gearbox alternative is best for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm equipment reducers were created with a hollow bore and invite for a corner change with optional dual output. The reducers come in 12 ratios ranging from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our correct angle gearboxes were created with five mounting choices providing versatility when incorporating the reducer into product.
RIGHT ANGLE BEVEL GEARBOX
bevel-right-angle-gearbox
The right angle bevel gearbox combines the top features of our right angle worm and planetary inline reducers. With a solid and efficient correct angle configuration, our right angle planetary gearboxes offer a robust solution. The right angle bevel gearbox will come in 18 ratios which range from 5:1 to 1000:1, and it is back-drivable at all ratios.
INLINE REDUCERS
I-SERIES PLANETARY GEARBOX
i-series-planetary-gearbox
Our I-Series little planetary gearbox configurations supply the smallest footprint and quietest operation of our swiftness reducers. These gearboxes are made to deal with varying loads with little backlash. With framework sizes 52cm, 62cm, and 81cm, 12 ratios ranging from 5:1 to 308:1, we have a solution to fit your needs. Our 52 frame size can be available with plastic material gears for noise-delicate applications.
INLINE PLANETARY GEARBOX
inline-planetary-gearbox
Our inline planetary gearbox configurations provide the highest effectiveness and best result torque of most our quickness reducers. These gearboxes are designed to manage varying loads with small backlash. Planetary equipment reducers operate more quietly than parallel shaft reducers. With 18 ratio choices ranging from 5:1 to 1000:1, we have a solution to suit your needs.
PARALLEL SHAFT GEARBOX
parallel-shaft-gearbox
Parallel shaft gearboxes will be the top choice for constant duty applications. Their equipment cluster design provides an effective method for dissipating high temperature. Parallel shaft gearboxes have the shortest length of our inline gear reducer options so they work well in environments with limited space. Our parallel shaft gear reducers provide an affordable drop-in substitute solution for most small parallel shaft gearmotors.
Wormwheel gearboxes go by several names, including 90-degree gearboxes, right position gearboxes, rate reducers, worm gear reducers and worm drive gearboxes. Gear reduction boxes include a gear arrangement in which a equipment in the kind of a screw, also called a worm, meshes with a worm gear. These gears are usually made from bronze and the worms are steel or stainless steel.
While worm gears act like a spur equipment, the worm gearboxes are significantly smaller than other gear reduction boxes. A primary benefit of worm gear reducers can be that they generate an output that is 90° from the insight and can be used to transmit higher torque or decrease rotational speed. Most often, a worm gearbox offers right hand threads; to improve the direction of the output, a left-hand thread worm gearbox is necessary.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Equipment Reducer 10:1 Ratio
Cast Iron Worm Gear Reducers can be found in center distances 1.33 – 3.25 inches in ratio’s from 5:1 to 60:1. The systems have a one piece #Fc20 all cast iron housing, NEMA electric motor quill style input flanges or shaft inputs, come pre-stuffed with synthetic oil and also have a 12 months warranty.
Features:
Tapered roller bearings upon the input and output shafts
Embedded double-lip oil seals
Anti-rust primer applied inside and outside of the gearbox
Air dry special dark paint
Product Specifications
OUTPUT SPEED (RPM) 175
OVERHUNG LOAD LBS. 300
EFFICIENCY 86
BRAND EP
MANUFACTURERS PART NUMBER HdRS133-10/1-R
CROSS REFERENCE Boston 713; Grove B213
DESCRIPTION Cast Iron Correct Ange Worm Gear Reducer
BACKLASH (FT.) (ANGULAR MINUTES) 27
Result SHAFT THRUST LOAD (Pounds.) 300
MAX INPUT HP 0.77
MAX TORQUE (IN-LBS.) 247
WCD CENTER INCHES 1.33
GEAR RATIO 10:1
Ever-Power EP series triple-reduction worm gear velocity reducers are available in ratios from 5000:1 to 175,000:1 and center distances from 7” to 20” (larger sizes on request). Result torque ranges from 33,000 in pounds. for the 7” CD EP-70 to 582,900 in pounds for the EP-200. Mechanical HP insight requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers are available in four configurations: horizontal, vertical, shafted, and shaft mounted.
These reducers are perfect for water/waste-water equipment drive applications such as for example thickeners and 
clarifiers, which require a vertical straight down shaft. Other offered configurations also make Ever-Power triple decrease reducers perfect for make use of on mixers, elevators, solar panels, astronomical telescopes, indexing tables, hoists, conveyors, or additional process or materials handling systems where huge torques/gradual speeds are needed.
These reducers are also obtainable with a helical principal reduction stage and so are termed the HDVM series
Enclosed Gears / Gearboxes
Enclosed gears, also called gearboxes or quickness reducers, are open gears contained in a housing. The casing facilitates bearings and shafts, keeps in lubricants, and protects the components from surrounding circumstances. Gearboxes are available in an array of load capacities and swiftness ratios.
The purpose of a gearbox is to improve or reduce speed. Consequently, torque output would be the inverse of the function. If the enclosed drive is a swiftness reducer, the torque result increase; if the drive improves speed, the torque result will decrease. Gear drive selection elements include: shaft orientation, velocity ratio, design type, nature of load, gear rating, environment, mounting position, working temperature range, and lubrication.
Basic Types of Gearboxes
Worm Gear Speed Reducers
A single reduction acceleration reducer can achieve up to 100:1 reduction ratio in a small package. Known as right position drives, these contain a cylindrical worm with screw threads and a worm. With a single start worm, the worm equipment advances only one tooth for each 360-degree change of the worm. So, regardless of the worm’s size, the apparatus ratio is the ‘size of the worm gear to 1′. Higher decrease ratios can be created through the use of double and triple decrease ratios.
Helical Gear Speed Reducers
Provide high-efficiency speed decrease through 1, 2, 3, or 4 units of gears. Power can be transmitted from a high-acceleration pinion to a slower-speed equipment. Helical gears usually operate with their shafts parallel to each other. Both most common types are the concentric (insight and result shafts are in line) and parallel shaft (insight and result shafts are offset). Single-stage helical gear reducers are usually used for equipment ratios up to about 8:1. Where reduce speeds and higher ratios are needed, dual, triple, and quadruple gear reduction stages may be used.
Cycloidal Disc Speed Reducers
Not the same as conventional gearing because they operate without a high acceleration pinion or equipment teeth, and the components operate in compression instead of shear. This is due to the style of the cycloidal discs that roll within a band gear housing, similar to a planetary style. The main components will be the eccentric cam, the internally flanged output shaft, the discs, and the ring gear housing.
Three Mounting Options
(L-R) Foundation Mounted, Shaft-Mounted, Gearmotor
(L-R) Base-Mounted, Shaft-Mounted, Gearmotor
Base-mounted reducers, which have feet for bolting, will be the most common.
Shaft-mounted reducers have a hollow output shaft that slips over the driven shaft.
A gearmotor combines a specific gearset with a electric motor. A motorized reducer resembles a gearmotor except that it is driven by another NEMA C-face motor.
Seals and Breathers
Seals are used between the gear housing and insight and result shafts to retain essential oil and block dirt. The most commonly used type, the radial lip seal, includes a metallic casing that fits in to the casing bore and an elastomeric sealing lip that presses on the shaft. Labyrinth seals are use for high-velocity applications, and consist of a housing with a series of rings that limit leakage. A breather is certainly a connect with a hole that is mounted in the apparatus housing allowing airflow and relieve inner pressure.
Lubrication
Enclosed gears are generally lubricated with oil. The most common types of oil are rust and oxidation inhibiting, extreme pressure, compounded, and synthetic. Other styles consist of grease and solid film. Grease can be utilized for worm, planetary, cycloidal, and hypoidal reducers. Common distribution strategies are a splash system and a circulating system
Worm Reduction Gearbox Application:
Worm drives certainly are a compact means of substantially decreasing velocity and increasing torque. Little electric motors are generally high-speed and low-torque; the addition of a worm drive increases the range of applications that it could be suitable for, specially when the worm drive’s compactness is considered.
Worm drives are found in presses, in rolling mills, in conveying engineering, in mining sector machines, and on rudders. Furthermore, milling heads and rotary tables are positioned using high-precision duplex worm drives with adjustable backlash.